Logo
    Contact us
    RONYAN CNC MACHINERY CO., LTD
    Tel:+86-769-81767961
    Fax:+86-769-81767962
    Mobile:+86-013612653055 13431125835
    ADD:D6-2 chang ron International ,Chang'an Town ,Dongguan City,China
    Company news Location:Home >> News >> Company news >> Detailed content

    The repair function of the middle wire cutting machine

    release time:2018-12-21  viewed:5157次
     The cutting of the middle thread increases the function of repairing the knife, and the knife is also the multi-knife cut that we often say. Generally, the first knife is used for cutting, and the next few tools are used for repairing the finish. Therefore, the smoothness that can be achieved by using the repairing tool is higher.
    Since the wire is used for repeated discharge. When using the repairing tool function, as the cutting area increases, the wire drawing and the wire loss are more and more fine, which ultimately affects the accuracy of the work and the discharge and cutting effect of the last several times. In order to achieve high precision, the actual diameter of the molybdenum wire needs to be measured before starting the cutting. After the new molybdenum wire is cut after the guide wire is cut, the molybdenum wire is tightly tightened before the workpiece is officially cut. If the molybdenum wire has been used repeatedly for a long period of time, it is necessary to measure the diameter and roundness of the molybdenum wire. When the difference is too large, a new electrode wire must be replaced.
    Pay attention to the following points when using repeated cuts:
    1. When the molybdenum wire is empty, check the molybdenum wire for jitter.
    2. Whether there is a cut mark on the surface of the conductive block, and whether the molybdenum wire is trapped in the conductive block.
    3. Whether the flow rate and color of the working fluid are normal.
    4, before processing, the process needs to imitate. Determine if the cut program generated by the system is true.
    5, according to the characteristics of the data, the final cut of the remaining work as long as possible to reduce the impact of data distortion.

    A previous: How about WEDM machine tools? Adjustment of Wire Cutting Wire
    Next news: How to choose a wire cutting machine?
    hotline line
    About us
    List enterprise profile
    List corporate culture
    List organizational structure
    List The board of directors.
    Products
    List CNC Medium Speed Wire Cut Electric Discharge Machi
    List Intelligent High-Speed Wire Cut Electrical Dischar
    List Numeric control Electric spark shaping machine
    List EMD drilling machines
    List Wire cutting accessories
    List Technical Data of Non-mental Dedicated CNC Wire-cu
    List Other numerical control device
    News
    List Company news
    List Industry dynamics
    List Product knowledge
    Contact us
    List Contact us
    List Online Message
    Copyright: Dongguan Rongyang Machinery Co., Ltd. Address: No. 137, Xingyi Road, Chang'an Town, Dongguan City, China Service Hotline: 13612653055  Technical Support: Xinze Technology
    ENGLISH 中文
    收缩
    • QQ咨询

    • RONYAN CNC MACHINERY CO., LTD
    • RONYAN CNC MACHINERY CO., LTD
    • RONYAN CNC MACHINERY CO., LTD
    • 电话咨询

    • 0769-81767961
    欧美XXXX做受欧美,亚洲A∨国产AV综合AV下载,国产CHINESE男男GAY视频网,最近的2019中文字幕免费MV